Espresso Picked up a used BDB for $700 September 3, 2024 Loving this new set up! I previously had a Breville Touch Impress but wanted to upgrade. What do you think? Let me know if you have any suggestions.by JaX0XO 5 Comments sfaticat 3 months ago I really need to browse new. A friend got a used Decent for $2200 now this. What a steal! Is it in working order? Pleasant-Pattern-903 3 months ago Don’t roast me, I’m still learning. writesCommentsHigh 3 months ago the best machine.You are probably going to want to replace the o-rings ASAP as they are likely already leaking. I say this from personal experience.You will need a pz2 or pz3 screwdriver. Ex: [https://www.amazon.ca/gp/product/B00E55DL4I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1](https://www.amazon.ca/gp/product/B00E55DL4I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)Phillips will not work on the screws near the group head.Most recommend replacing the o-rings every 6-12 months.Otherwise you can send it in to Breville for a free estimate. Shipping is free.Good luck! iamgarffi 3 months ago I had the Touch Impress too and only thing I was impressed about was lack of consistency.Swapped for Oracle Jet and in love – 40+ shots so far and not a single hiccup with grinding, dosing or extraction.Enjoy your setup too. JuggernautNo554 3 months ago I’ve had this same model for 10 years. Pulled 6000 shots in that time. Replaced a few inexpensive parts along the way. Awesome machine.Write A CommentYou must be logged in to post a comment.
sfaticat 3 months ago I really need to browse new. A friend got a used Decent for $2200 now this. What a steal! Is it in working order?
writesCommentsHigh 3 months ago the best machine.You are probably going to want to replace the o-rings ASAP as they are likely already leaking. I say this from personal experience.You will need a pz2 or pz3 screwdriver. Ex: [https://www.amazon.ca/gp/product/B00E55DL4I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1](https://www.amazon.ca/gp/product/B00E55DL4I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)Phillips will not work on the screws near the group head.Most recommend replacing the o-rings every 6-12 months.Otherwise you can send it in to Breville for a free estimate. Shipping is free.Good luck!
iamgarffi 3 months ago I had the Touch Impress too and only thing I was impressed about was lack of consistency.Swapped for Oracle Jet and in love – 40+ shots so far and not a single hiccup with grinding, dosing or extraction.Enjoy your setup too.
JuggernautNo554 3 months ago I’ve had this same model for 10 years. Pulled 6000 shots in that time. Replaced a few inexpensive parts along the way. Awesome machine.
5 Comments
I really need to browse new. A friend got a used Decent for $2200 now this. What a steal! Is it in working order?
Don’t roast me, I’m still learning.
the best machine.
You are probably going to want to replace the o-rings ASAP as they are likely already leaking. I say this from personal experience.
You will need a pz2 or pz3 screwdriver. Ex: [https://www.amazon.ca/gp/product/B00E55DL4I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1](https://www.amazon.ca/gp/product/B00E55DL4I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)
Phillips will not work on the screws near the group head.
Most recommend replacing the o-rings every 6-12 months.
Otherwise you can send it in to Breville for a free estimate. Shipping is free.
Good luck!
I had the Touch Impress too and only thing I was impressed about was lack of consistency.
Swapped for Oracle Jet and in love – 40+ shots so far and not a single hiccup with grinding, dosing or extraction.
Enjoy your setup too.
I’ve had this same model for 10 years. Pulled 6000 shots in that time. Replaced a few inexpensive parts along the way. Awesome machine.